PEBBLE
- Windows Compatible
- Mac Compatible
- Linux Compatible
- Not Chrome Compatible
- Not iOS Compatible
- Not Android Compatible
Product Details
PICAXE Electronic Bread Board Layout Emulator (PEBBLE) is a free, open source breadboard layout tool developed by the PICAXE community (many thanks to 'WestAust55') for the graphical representation of PICAXE Circuit breadboard layouts.
PEBBLE will work in most modern browsers. See the PICAXE forum thread for more details about using PEBBLE.
Downloads
PEBBLE ZIp File (version 3.1) | PEBBLE ZIp File |
Revision History
3.1e 29 October 2016
Fixed problem where Load/Save function failed when 1-span wire links were included.
Added 90 degree bends to the 1-Spare wire links range to improve routing flexibility.
Expanded the localisation translations for Czech and Spanish languages
Included notes on how to add a new breadboard (in the Support folder)
Included notes on how to add a new component (in the Support folder)
3.1d 5 Sept 2016
Split the "ProtoBrd" group into two - One for 1-Span wire lines and second for strip cuts and other edits
Added a new "Floating" group similar to the "Notes" which can hold components/items that will not be locked to the grid for positioning
Some icons on the floating menu re-positioned
3.1c 24 Aug 2016
Fixed bug where some terminal group items did not show the correct image on first selection if user selected wrong # of pins (but would on re-entering properties window)
Fixed bug where selection area for IC's extended 1 row below the bottom of the image
Added 0.0 Ohm resistor option and altered gold band shading (so less like yellow) for values < 1.0 Ohms
Added vertical stereo programming sockets suitable for soldering to end of strip boards
Modified the new Strip/Prototyping board parts/edits ("ProtoBrd" group) dialog box to provide added selections for 1-span pre-defined links.
Added under the "ProtoBrd" group:
- Three variants of insulated 1-span cross over wires with various wire colour options
- A 2-hole wide x 10 hole high blank mask for use primarily at left side of strip boards as off-board area
- A 2-hole high x 6 hole wide blank mask for use primarily at top side of strip boards as off-board area
- Options for bare and insulated 1-span wire links originating from a hole with and without small spot-face cut
- 1-Span wires can now go in any one of 16 nominal directions from any hole
- 1-Span offset wire links can now be placed to left or right and above/below relative any row of holes
3.1b 16 Aug 2016
Fixed bug for wires where a copied wire did not copy across all the parameters for insulated wire ends
Fixed bug to correctly display the AXE029 module when selected for the 28/40 pin PICAXE parts
Localisation file for Castellano (Spanish) included (courtesy of PICAXE forum member Sedeap)
Increased the range of permissible sizes for the General Strip board. Now 6 to 50 holes wide and 10 to 71 holes high.
Added Datak 12-600B Proto-Board
Added LV8549MC SOIC Dual H-Bridge (suit smaller stepper motors and simple motor controllers)
Added two new transistor orientations with the legs all vertically orientated (best for strip/proto board work)
Added two new sizes to Notes as "Micro Tag" and "Medium Note"
Added vertical boxed 2 row 5-way headers (as often used with ribbon cable IDC type connectors/sockets) to terminal group
Added spring terminals having 2.54mm centres with 2 to 10 way options
Added spring terminals having 5.0 mm centres with 2 and 3 way options (seemingly not available in larger sizes)
Added standard PICAXE stereo type programming socket with socket to left and right (for strip board projects)
Added single LiPo AA battery cells in horizontal and vertical orientations (positive to left / up)
Added components to the new "ProtoBrd" Group:
Added new "Group" on the floating menu for Strip/Prototyping board parts/edits ("ProtoBrd" group)
- Inter-hole track cut
- Small spot face cut over hole
- Large spot face cut over hole
- Resistor (bare) lead extension for horizontal and vertical resistors
- Small spot/dot (red colour) to indicate when a hole is blocked/occupied from reverse side
- Added 6mm Pan-head bolt in horizontal and vertical orientation as dummy AA cell positive terminal
- Bare wire link orientated straight N-S
- Bare wire link orientated straight NE-SW
- Bare wire link orientated straight E-W
- Bare wire link orientated straight NW-SE
- Bare wire segment aligned straight N-S and offset between holes
- Bare wire segment aligned straight E-W and offset between holes
- Bare wire link orientated NE from hole and then bent up
- Bare wire link orientated NE from hole and then bent right
- Bare wire link orientated SE from hole and then bent right
- Bare wire link orientated SE from hole and then bent down
- Bare wire link orientated SW from hole and then bent down
- Bare wire link orientated SW from hole and then down left
- Bare wire link orientated NW from hole and then bent left
- Bare wire link orientated NW from hole and then down up
- Moved the "X" symbol for track cut from "Miscellaneous" group to the "ProtoBrd" group
(deprecated in Miscellaneous group - no longer in menu list but still works from old project saves/listings)
3.1a 01 Jan 2014
Added 20 x 10 "Finger Proto-Board
Added MAX7219 8-digit 7-seg LED driver
Added PT6961 6-dig 12-seg LED driver
Added WS2801 3-Channel LED driver
Added WS2803 18-Channel LED driver (DIP and SOP formats)
Added Radio Shack 276-159 Breakout Board - as a component under the miscellaneous (LDR) group
3.1 27 Aug 2011
Added code to permit language localisation with auto locale detection - user may need to add their language file
localisation file for Czech included
localisation file for French (Francais) included
Added PICAXE 08M2
Added PICAXE 14M2
Added PICAXE 20M2
Added 74HC138 - 3 to 8 Decoder with Active Low outputs
Added 74HC238 - 3 to 8 Decoder with Active High outputs
3.0i 6 Feb 2011
Added 74HC4051 8-channel Analogue Switch IC == CD4051
Added 74HC4052 Dual 2-channel Analogue Switch IC == CD4052
Added 74HC4051 Triple 2-channel Analogue Switch IC == CD4053
Added SY4090 MOS Relay HFS2 series in DIP6 package to IC group
Added ceramic capacitor selection to capacitor range
3.0h 27 Dec 2010
Corrected outline for SAA1064 to be 0.6 inch wide (not 0.3 inch wide)
Added Speakjet - the Magnevation speech and sound synthesiser chip
Added an "NC" image under misc component set for No Connection indication
Added small tactile momentary switch under the DIP Switch group
Added large tactile momentary switch under the DIP Switch group
Added Jaycar HP9556 Mini Proto Board
Added Jaycar HP9558 Large Proto Board
Added Jaycar HP9540 Small Strip Board 95 x 76 mm
Added Jaycar HP9540 Small Strip Board 95 x 152 mm
Added Jaycar HP9540 Small Strip Board 95 x 303 mm
2.5 15 January 2010
Added 25mm high single digit 7-segment LED display in DIP IC group
Added 20mm high dual digit 7-segment LED display in DIP IC group
Added 9mm high quad digit 7-segment LED display in DIP IC group
Altered code to add a new selector so that an off-board component area can be turned On or OFF above the breadboard.
Code is backward compatible and will still accept old component lists without the selector - gives no top area
Altered program code so that breadboard images only load as required/used.
This typically saves around 4MBytes of download when internet hosted.
Altered code for drawing of resistor to be more robust and work correctly under Windows 7
2.4e 19 December 2009
Added the Rev Ed FRM015 serial to parallel printer interface chip
Added the MCP4011 up/down 64 pos single SPI digital pot IC
Added the MCP41xxx series 256 pos single SPI digital pot IC
Added the MCP42xxx series 256 pos dual SPI digital pots IC
Added the MCP46X1 series 128/256 pos dual NV i2c digital pot IC
Added the MCP4822 dual 12-bit SPI DAC IC
Added the PFC8574 8-bit i2c IO expander IC
Added the 4066 / 74HC4066 Qual Analog/Bi-Lateral Switch IC
Added the 4015 / 74HC4015 Dual 4-bit Shift Register IC
Added CA3140 8-pin Op Amp IC
Added Generic 8-pin Op Amp IC
Added a top view SPST push button switch under the misc (LRD) group
Added a 14 pin DIP IC outline
Enabled the 10 position DIP switch
2.4D(adj) correct/add 25 Oct 2009
A few minor updates have now been added to PEBBLE.
Futurlec strip board strip spacing corrected
74HC59516-pin IC image improved.
Added the 74HC164 14-pin IC = 8-bit (Octal) serial shift register with parallel out
Added the 74HC165 16-pin IC = 8-bit (Octal) parallel load serial shift register
Added the 74HC174 16-pin IC = Hex (6) D-type flip flops with clear function
2.4D 4 October 2009
Added 4D system Devboard-G1
Added 4D System uOLED-96-G1 display
Added 4D System uOLED-128-G1 display
Added 4D System uOLED-160-G1 display
Added 4D System uUSB-CE5 module
Added 4D System uUSB-MB5 module
Added 4D System uUSB module
Added 4D System uDrive Module
Added 4D System uCAM Camera Module
Added 4D System SOMO 14D audio-Sound Module
Added SRF005 Trig/Pulse Ultrasonic Module
Added SRF008 i2c comms Ultrasonic Module with Light Level
Added SPE030 Speech Module for both i2c comms and switch control
Added CMPS03 Compass module
2.4c 28 September 2009
Added 74LVC245A in SOIC format on SOIP to DIP adapter baord
Added Rev Ed AXE200 28X2 module
Added Rev Ed AXE021 PICAXE-08 Proto Board
Added Datak 12-611 Proto Board
Added Dick Smith Electronics H5608 Proto Board (Datac 21-113) = Radio Shack part #276-150
Added Futurlec STPBRD1 Large Strip Board
Added Futurlec STPBRD2 Small Strip Board
Added Protobloc 1A Breadboard (as available from Rapidonline)
Added Protobloc 2A 64 row Breadboard (as available from Rapidonline)
Added Horizontal and vertical 2-pin jumpers to match with header pins
Added "X" icon as track cut for strip boards
2.4b 12 September 2009
Added HopeRF HP03D Barometric Pressure Sensor (SIL version)
Added HopeRF HP03S Barometric Pressure Sensor (SMD version)
Added the 29 row breadboard from the Rev Ed AXE091 Evaluation kit
2.4a 4 August 2009
Added Gadget Gangster Half board and Full board to Breadboard options
Added two side by side standard breadboards in 38 and 50 row sizes
Altered resistor band colour for yellow and orange
2.4 26 July 2009
Added a selector for both small and large note tabs
Added 1-pin test pin and sockets (under the Misc group - select from LDR icon)
Adjusted wire colours for some miscellaneous components
Fixed code for missing large vertical orientated Tant cap
Fixed code to maintain correct image when a component is copied
2.3 19 July 2009
Added a screen print/dump facility via a button
Modified the wire edit menu layout
2.2 16 July 2009
Added 1 hole resistors,
Added 1 hole diodes
Added CR2032 3V battery in holder
Added Trim pot. Horizontal and vertical multi-turn version
Added 40 pin DIP IC's
Added White LED's
Added 555 Timer , 4 pin DIP (blank), 6 pin DIP (blank)
Added 4 pin opto coupler ( transistor output style) and 6 pin opto coupler (MOC2030 triac output style)
Added extra proto typing boards to repertoire
Added keypads in 3x4 and 4x4 format
Added 16 terminal LCD with backlight
Added SPDT and DPDT relays
2.1 4 July 2009
Adjusted colour of white wire to off-white so visible against white boards
For wires,added ability to end before or after a line of holes and selection for bare or insulated ends.
2.0 28 June 2009
Expanded range of breadboards to toal of 38 variations
Added Blue LED's
Added 24 pin DIP IC's
Added wire placement features including with 1/3 space offset for horizontal wires.
Added batteries, pots, LCD modules, motors and servo's
1.2 14 June 2009
Added TO-220 format transistors
Added the Rev Ed AXE029 breadboard programming adapter
Added header pins covering strips from 2 to 9 pins in length.
Added header sockets covering strips from 2 to 9 pins in length.
Added DIP switches in 2 to 9 switch modules and Hex rotary switch
Added a range of SIL modules.
1.1 9 June 2009
Improved text colour for capacitors changed to black and alignment relative to image.
Axial capacitors have had the polarity band toned down so text more easily read.
Diodes now have blue text for the orange glass type diodes, white text for black body diodes in
horizontal orientation and grey text for black body diodes in vertical orientation for ease of reading.
Added switches in push button, and toggle (SPST and SPDT) formats each with 4 different selectable
sets of wire colours. Provision for a label in black text over the switches included.
(just leave the label detail in the drop down window blank when no label wanted)
Started on terminals which will include SIL modules. Menu structure is there along will the coding
but no terminal strips or SIL modules as yet. The PICAXE (stereo) programming socket is already there
1.0 5 June 2009
First release of PEBBLE
Share