iButton Datalogger
Product Details
The iButton Temperature Datalogger is a coin sized electronic device housed in a robust
stainless steel can. This water-resistant stainless steel can houses a battery and a silicon
chip that acts as a temperature sensor, a clock/calendar, and electronic memory to record
temperature readings.
The thermometer measures temperature from -30°C to +85°C in 0.5° increments, while
the clock measures seconds to years accurately to +1 minute per month from 0°C to
45°C. The recyclable iButton logs data for more than 10 years or up to 1 million
temperature measurements. Each iButton has a unique identification number so that
each device can be individually identified. It is also possible to store user information
like the product description or the operators name within the memory.
The starter pack contains:
- iButton datalogger and plastic keyfob
- USB cable and iButton Dock
The software and manual can be downloaded from the Resources tab above. Please note:
- You must install the USB driver before the software is first used
- Please ensure that when the USB cable is inserted into the computer the iButton datalogger is NOT inserted (ie the docking cable should be empty when the USB comnnection is made to the computer).
Specification
The thermometer measures temperature from -30°C to +85°C in 0.5° increments, while
the clock measures seconds to years accurately to +1 minute per month from 0°C to
45°C. The recyclable iButton logs data for more than 10 years or up to 1 million
temperature measurements.
Resources
| USB Drivers (install before first use!) | USB drivers |
| iButton Datalogger Software | Full Install |
| Manual | Manual |
Video
Revision History
Sorry, there's no revision history available for this product.
Comments
Login to leave a comment.