Project Gallery
Archive for August 2013
-
Easy Thermocouple to Picaxe Interface
Submitted by: nickcinquinoEasy Thermocouple to Picaxe Interface Nick Cinquino 8/28/2013 Thermocouples are a convenient sensor for the measurement of temperature. They have two i...
View Project -
3 Zone Alarm using PICaxe 14M2 OLED
Submitted by: kando3 Zone Alarm Works with 3 separate zoned areas (3 rooms, 3 buildings etc) Each zone should have two wires returning to the micro control box. Each zone s...
View Project -
PICAXE XTREME PROJECT BOARD
Submitted by: akarshThis my custom designed picaxe master project controller board, this has a max ability to control up to 16 servo, 16 general purpose inputs and outp...
View Project
Past Competition WinnersView all winners
-
3 Zone Alarm using PICaxe 14M2 OLED
Submitted by: kando3 Zone Alarm Works with 3 separate zoned areas (3 rooms, 3 buildings etc) Each zone should have two wires returning to the micro control box. Each zone s...
View Project -
Automatic Chicken Door Opener with PICAXE
Submitted by: Joe BlogUsing the superb PICAXE 08M2 chip I put together an automatic coop door opener (named the Cluck-O-Matic) so I did not have to get up so early in the morning ...
View Project -
BEAM/Picaxe 20x2 Solar Turbot
Submitted by: JamesWhiteA Turbot is a robot that moves about using spinning flagella (arms) much like a bacteria moves about. Tumbling along, charging, looking for light and then mo...
View Project